Roller Shutter Doors – Cost-Effective Way to Reduce Your Carbon Footprint

There are many considerations that need to be taken into account before buying a commercial roller shutter. Firstly, one needs to determine the exact purpose of the shutter for this would determine what type and design would be best suited. If the purpose is for opening and closing a large space, then a more permanent solution is required. For a window or sliding door in such a large space, a temporary solution like this would be sufficient.

Why need to you Roller Shutter Doors

Commercial Roller Shutter

The first major hurdle to be overcome is recognizing the obvious difference between a commercial roller shutter and a residential roller shutter since, sometimes, it can be difficult to distinguish the differences. Commercial roller doors are typically made up of corrugated plastic sheets which are connected to each other via corrugated metal tracks to complete the curtain. This curtain then is attached to the drum (rolling barrel) and forms the shutter. It is important to note that, on commercial doors, there is a secondary metal track, usually stainless steel, which allows the doors to roll up thus keeping dust and other debris out of the office or store. Similarly, in a residential setting, these curtains are often made from corrugated fiberglass or even vinyl. However, if the building is located in a harsh weather condition, then both types of curtains will not prevent harsh weather from entering the building as the corrugations will be unable to withstand the pressure.

If cost is a constraint for installing roller shutter doors, then the curtains can be made in bulk to reduce the installation cost. However, this also means that the curtains will not last very long due to constant exposure to harsh weather. For this reason, it is important to go for a curtain with a high quality material and long life expectancy. For this, one should look for curtains that use polyester filaments or ones made with fabrics that are capable of withstanding pressures of up to 250 pounds per square inch. Such products will ensure longer service life.